Fire Escape Platform

  less than a minute  

• CROSSBAR (x1)

  • STL file: CROSSBAR.stl
  • STEP FILE: CROSSBAR.step

• FUNNEL-LEFT-1 (x1)

  • STL FILE: FUNNEL-LEFT-1.stl
  • STEP FILE: FUNNEL-LEFT-1.step

• FUNNEL-LEFT-2 (x1)

  • STL FILE: FUNNEL-LEFT-2.stl
  • STEP FILE: FUNNEL-LEFT-2.step

• FUNNEL-RIGHT-1 (x1)

  • STL FILE: FUNNEL-RIGHT-1.stl
  • STEP FILE: FUNNEL-RIGHT-1.step

• FUNNEL-RIGHT-2 (x1)

  • STL FILE: FUNNEL-RIGHT-2.stl
  • STEP FILE: FUNNEL-RIGHT-2.step

• GOLFBALL-HOLDER-PLATE (x1)

  • STL FILE: GOLFBALL-HOLDER-PLATE.stl
  • STEP FILE: GOLFBALL-HOLDER-PLATE.step

The fire escape platform was designed to be assembled using hot glue and should look like the image below when completed. 15% infill should suffice for this assembly.

Fire Escape Platform

←Previous Next→